Jump to content
Sign in to follow this  
MR1600

bundy tube and fuel bits

Recommended Posts

does anyone know where the cheapest bundy tube can be found in perth

i have found

3/16th bundy @ $8/m at Perth brake parts

5/16th bundy @ $12.5/m at hose co

3/16th bundy @ $14/m at hose co

but there must be cheaper places...

also where can i find reducers for fuel hose

say for instance i have a 3/8th hose that i need to mate with 1/2 inch hose..

cheers

Share this post


Link to post
Share on other sites

I got my 10mm OD, 8mm ID aluminium fuel line from bunnings. It came in 4m lengths and it only cost me $9.75 for 4m!

You will need a pipe bender to bend it, and a double flaring tool to flare the ends so the hoses/fittings dont blow off...

Chris

Share this post


Link to post
Share on other sites

Dattoman1000 has a good, vice mounted double flarer, so if you ask him nicely he may lend you his services?

Share this post


Link to post
Share on other sites

I get all my hard to find fittings, allen key cap head bolts and so on from either Coventry's or Blackwoods/Atkins Carlisle never had any probs most of them know what they are talking about. No 16/17 yr olds who don't know their arse from their elbow.

Share this post


Link to post
Share on other sites

3/16 is $30 for 6m roll

1/4 is $36 for 6m roll

5/16 is $114 for 26m roll (this seems to be the only way it comes for some reason)

3/8 is $50 for 6m roll

I only have 3/16 (3 rolls) and 1/4 (1 roll) in stock at the moment

Share this post


Link to post
Share on other sites
I got my 10mm OD, 8mm ID aluminium fuel line from bunnings. It came in 4m lengths and it only cost me $9.75 for 4m!

What department was it in? I just had a quick look in the plumbing section and they only had copper?

Share this post


Link to post
Share on other sites
I got my 10mm OD, 8mm ID aluminium fuel line from bunnings. It came in 4m lengths and it only cost me $9.75 for 4m!

What department was it in? I just had a quick look in the plumbing section and they only had copper?

It was in the part where all the aluminuim is... lol.

Im not trying to be a smart ass.. its just where all the flat, angle, tube etc.etc. aluminium is.

Took me a while to find in my bunnings...

Chris

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.


Dish service areas


×